Castle Link 2
Bluetooth® Information
Instructions on how to connect wirelessly to your ESC/BEC using B-Link 2 adapter.
Turn on Bluetooth® on your computer.
(Simple USB Bluetooth dongle: $10 TP-Link from Amazon)Open Castle Link 2 (v1.1.0 or higher).
Click “Bluetooth” at the top of the screen, then select “Add Bluetooth Device”.
Enter 4-digit passcode (default is 1234); This can be changed after connecting.
Connect B-Link 2 adapter to ESC or BEC.
Power on ESC or BEC, it should connect automatically.
Use Castle Link 2 as normal. When finished, disconnect power and close program.
Notes: Not compatible with all ESCs/BECs.
Check the B-Link 2 compatibility chart to see if your product is supported;
Products with two asterisks require the ESC to be disconnected from the receiver.